商品描述
PENTENS T-200H is based on a newly developed Water based Polyurethane and Acrylic Polymers. It is dramatically reduces solar heat absorption in either air-conditioned or non-air conditioned buildings. It takes the majority of the heat load off a building’s skin and reduces temperatures to approximately that of outside shade.

ADVANTAGES:
Water based, environment friendly
UV protection
Chemical resistant and waterproof
Good adhesion
Has a high rate of water vapor transmission
High elongation
Non-toxic

USES:
PENTENS T-200H, which is one-part elastomeric cross linking PU latex copolymer emulsion designed as exposed waterproofing coating on:
RC gutters and planter boxes
Floor slabs
Deck
Wood siding/Fences
External wall
Flat roof
Metal roof
Concrete structures

PHYSICAL DATA:
Form: PU-Acrylic
Color: Grey, White
Density: 1.1
Solid content: > 55 % by weight
Elongation: > 600% (ASTM C412)
Tensile Strength: > 40 kgf/cm2 (ASTM C412)
Application Temperature: 8C to 40C
Packaging: 20kg/ 200kg/pail
Shell Life: 12 months when unopened and undamaged
Storage Condition: Store in a cool and dry place

APPLICATION:
- Surface Preparation:
Surface must be sound, dry and clean (free of dirt, gravel, pollution, mildew and all foreign material). Apply if any rain is imminent. Repair flashings and damaged areas. Cracks and old bitumen joints shall be repaired first.

Substrate should be primed with a 1:3 mixture of PENTENS T-007 and water. Brush on at the approximate rate of 0.3 kg/m. On areas exposed hot drying winds. 2 to 3 thin coats of paint may be more successful than 1 thick coat.
PENTENS T-200H is suggested to apply at least 2 coats. The first coat should be applied in one direction only. If possible the second coat should be applied at right angles to the first. Leave to cure for approximately 8 hours before applying second coat. PENTENS T-200H can be installed with conventional airless spray equipment, brush or roller.

*** PLEASE SPLIT ORDER IF YOU WISH TO ORDER MORE THAN 1 UNIT ***

//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

自取请选择 For SELF PICK UP : -

- CHOOSE "Others (West Malaysia)"
- Proceed payment & get your product at the following address


永合兴五金机械

YONG HUP HENG MACHINERY HARDWARE

+6018 9644 365

180 & 182, Jalan Layang 16, Taman Perling 81200 JB Johor