1
Share:
20KG PENTENS T-100 WATER-BASED PU BITUMINOUS WATERPROOFING MEMBRANE
RM269.00
Category:
QingLong - Waterproofing
Pentens T-100 is a single component which is newly developed polymer of MMA, natural rubber, and polyurethane combines with the reaction with asphalt and then being modified and further emulsified to form elastic waterproof membrane.
ADVANTAGES
High elasticity
Will bond to almost any surface
Does not run or creep under any heat
Resists a wide range of acids and alkalies
Can be applied to a damp surface
Odourless and produces no fumes
USES
Floor slabs
Patios, terraces and balconies
Bathrooms
RC gutters and planter boxes
Swimming pools and water tanks
Basements and fountains
Retaining walls
To provide a better water and vapor-proof in complicating application surface compare to membrane-type and ensure better integrity between applied surfaces and waterproofing coating.
Important Notes
1. Thoroughly agitate contents before use.
2. Minimum ambient and substrate temperature is 5°C.
3. Never apply more than 1 kg/m2 of Pentens T-100 in one single layer.
4. Apply only to clean, sound substrates where surfaces should be well dampened but free of surface water and leaks.
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
自取请选择 For SELF PICK UP : -
- CHOOSE "Others (West Malaysia)"
- Proceed payment & get your product at the following address
永合兴五金机械
YONG HUP HENG MACHINERY HARDWARE
+6018 9644 365
180 & 182, Jalan Layang 16, Taman Perling 81200 JB Johor
ADVANTAGES
High elasticity
Will bond to almost any surface
Does not run or creep under any heat
Resists a wide range of acids and alkalies
Can be applied to a damp surface
Odourless and produces no fumes
USES
Floor slabs
Patios, terraces and balconies
Bathrooms
RC gutters and planter boxes
Swimming pools and water tanks
Basements and fountains
Retaining walls
To provide a better water and vapor-proof in complicating application surface compare to membrane-type and ensure better integrity between applied surfaces and waterproofing coating.
Important Notes
1. Thoroughly agitate contents before use.
2. Minimum ambient and substrate temperature is 5°C.
3. Never apply more than 1 kg/m2 of Pentens T-100 in one single layer.
4. Apply only to clean, sound substrates where surfaces should be well dampened but free of surface water and leaks.
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
自取请选择 For SELF PICK UP : -
- CHOOSE "Others (West Malaysia)"
- Proceed payment & get your product at the following address
永合兴五金机械
YONG HUP HENG MACHINERY HARDWARE
+6018 9644 365
180 & 182, Jalan Layang 16, Taman Perling 81200 JB Johor
Inquiry - 20KG PENTENS T-100 WATER-BASED PU BITUMINOUS WATERPROOFING MEMBRANE
View more
QingLong - Waterproofing
