QL- Waterproof Sealant is a quality product manufactured by sophisticated equipment with excellent adhesion and strong elasticity. Using high-quality elastic substance as main materials and added with various auxiliary materials such as polymer rubber and stabilizer.
QL-防水密封胶是由精密设备制造的优质产品，具有出色的附着力和强大的弹性。以优质弹性体为主要材料，并添加高分子橡胶，稳定剂等各种辅助材料。


Product Features:
1. It can form a firm and long-lasting adhesion to various materials such as concrete, metal and plastic.
2. It has excellent crack resistance and self-healing properties, thus can adapt to deformation and cracking of various structures;
3. Easy to apply; it can be used immediately after opening and applied on wet-based surfaces and joints with different materials;
4. Non-toxic, solvent-free, non-radioactive, it is a water-based environmental-friendly product.
产品特点：
1.它可以对各种材料（例如混凝土，金属和塑料）形成牢固而持久的附着力。
2.具有优异的抗裂性和自愈性，因此可以适应各种结构的变形和开裂；
3.易于申请；开封后可立即使用，并涂在具有不同材料的湿基表面和接缝上；
4.无毒，无溶剂，无放射性，是水基环保产品。


Application Range:
1. Waterproofing and moisture-proofing of bathroom, balcony, kitchen and etc;
2. Waterproofing of roofs, basements and pools;
3. Waterproof and sealing of various wall pipes and concrete cracks.
适用范围：
1.浴室，阳台，厨房等的防水防潮；
2.屋顶，地下室和水池的防水；
3.各种壁管和混凝土裂缝的防水和密封。


Application Methods 施工方法
Waterproof Layer 防水层
① Base surface preparation: The surface must be firm, clean, and no oil, water and flaking. Cracks and other defects should be repaired with the QL- Fast leakage fix. Thus, internal and external angles to be made round.
【基面处理：基层必须坚固、干燥、干净、无油污、无起砂，有裂缝等缺陷应先采用青龙堵漏灵修补，然后阴阳角做成圆弧形】
② Joints preparation: The bottom of the tube, internal and external angles are to be pre-painted with QL- Waterproof Sealant.
【节点处理：管根，阴阳角等预先涂刷一遍青龙粘弹防水密封胶】
③ First layer scrape coating: Apply the Waterproof Sealant evenly on the base surface that needs to be waterproofed. Note that the coating should not be too thick.
【第一遍刮涂：将青龙粘弹防水密封胶均匀的刮涂在需要做防水的基面上，注意一次刮涂不能过厚】
④ Second-layer scrape coating: After the first layer is dry and non-sticky to hand, apply the second layer evenly in perpendicular direction to the first layer, to ensure that the base is not exposed.
【第二遍刮涂：等待第一遍干固不粘手后，进行第二遍均匀刮涂，刮涂方向与第一道方向垂直，确保不露底】


Product Specifications 产品规格
Size: 1kg & 5kg & 18kg
Colour: Black


Product Usage产品用量
【1kg for 3.59ft2】【5kg for 18.3ft2】【18kg for 64.59ft2】


//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

自取请选择 For SELF PICK UP : -

- CHOOSE "Others (West Malaysia)"
- Proceed payment & get your product at the following address

永合兴五金机械
YONG HUP HENG MACHINERY HARDWARE
+6018 9644 365
180 & 182, Jalan Layang 16, Taman Perling 81200 JB Johor