Selleys is an Australian company which produces household DIY and cleaning products as well as adhesives and sealants for the trade market.

Knead It Steel Epoxy Putty is a fast-setting, industrial-strength polymer compound that enables permanent repairs to anything made of steel or other metals.

The modelling-clay like material eliminates drips and runs, facilitates adhesion to the substrate and allows the material to be shaped and formed as needed before curing begins. Once cured, it can be drilled, screwed, sawn, sanded, or painted. Suitable for interior or exterior use.


Selleys Knead It Steel 50g :
- Original Selleys product.
- Made in Malaysia
- High grade epoxy putty.
- Fast-setting polymer compound.
- Provides permanent repair to anything made of steel or other metals.
- Suitable for interior or exterior use.
- Dries to dark gray.
- 50g.
- 100% Brand New and in Good condition.
- Ship from Malaysia.


Suitable for :
- Repair engine parts
- Fix radiators
- Tanks
- Car parts
- Metal
- Wood
- Glass
- Masonry
- Plastics

Features :
- Will Not Sag, Run Or Drip.
- Easy To Use - No Mess.
- Can Be Drilled, Sawed, Sanded, Filed, Tapped, Machined Or Painted One Hour After Mixing.
- Good Adhesive Strength.
- Can Be Used To Reshape, Rebuild And Repair A Multitude Of Surfaces And Applications.
- Good Gap Filling Properties.
- Long-Lasting, Durable Solution.
- Heat Resistant To 120°C Continuously Or 140°C Intermittently.
- Can Be Used Under Water (But Dry Surfaces For Application Are Best And Recommended).
- Rapid Set (Less Than 10 Minutes).
- Can Be Used For Fuel Resistant Repairs.
- 50g

How to use this product?

1. Cut or twist off required amount
2. Mix by kneading with fingers to a uniform color. If mixing is difficult, warm to room temperature or slightly above
3. Apply to surface to be repaired within 12 minutes of mixing and mould to shape if required. For a smooth appearance, remove excess and hand rub with water or a damp cloth before hardening begins.
4. KNEAD-IT UNDERWATER should be use within 12 minutes, after 20-30 minutes it will harden and begin to form a strong bond.
5. After an hour KNEAD-IT UNDERWATER may be drilled, sanded, machined, filed, sawed or painted.
6. Apply to surface and strike off excess material, preferable with a tool wet with clean water


*When applying to a damp, wet or slowly leaking area, work the material forcefully into the surface and apply pressure until adhesion begins to take effect

Please read instructions before use.
Keep out of reach of children.